How to Flock a Dashboard

Step 1 – Repair and Sand the Surface

Sand the dashboard to create a suitable key for the adhesive to bond to. Repair any cracks, scratches or imperfections using an appropriate filler, then sand smooth before proceeding.

Step 2 – Clean and Prepare the Dashboard

Remove all dirt, grease, silicone, wax and loose material from the surface. Proper preparation is essential to ensure maximum adhesive adhesion and a consistent flock finish.

Step 3 – Suspend and Position the Dashboard

Suspend the dashboard using hooks, or position it so that excess flock fibres can fall away from the surface during application. This prevents fibre build-up and makes it easier to identify any areas requiring additional flock coverage.

Step 4 – Apply Flocking Adhesive

Apply an even, consistent coat of flocking adhesive across the entire surface. Avoid thin patches, as these can lead to poor flock coverage. Adhesive can be applied by brush, roller or spray equipment depending on the size and complexity of the part.

Step 5 – Apply Nylon Flock Fibres

Using a flocking machine, apply nylon flock fibres while the adhesive is still wet. Do not allow the adhesive to skin over before flocking. Ensure the earth connection is in direct contact with the adhesive-coated surface for optimum fibre orientation and coverage.

Step 6 – Allow to Cure

Allow the flocked dashboard to dry completely before handling. Once cured, remove any loose fibres using compressed air or a soft brush to reveal the finished flocked surface.

✓ Poor surface preparation

✓ Poor grounding

✓ Allowing adhesive to skin over

✓ Touching the flock before curing

Get professional results with the same flocking products trusted by automotive restorers, motorsport builders and professional applicators.